The Yealink WH62 is a wireless DECT headset available in mono (single-ear) and duo (dual-ear) models. The headset connects directly to net2phone Canada Yealink desk phones and your computer for use with the net2phone Sync desktop and web applications.

Connect the headset base

Connect the WH62 base station to your desk phone or computer and switch between them using the buttons on the base.

Connect to a net2phone Canada supported desk phone

Connect the base station directly to your desk phone using the included micro-USB-to-USB-A cable.

1. Connect the micro-USB end of the included cable to the Phone port on the back of the WH62 base.
2. Connect the USB-A end to the USB port on the back of your Yealink desk phone.
3. The desk phone will automatically detect the headset and route call audio to it.

Connect to a computer

Connect the base station to your PC or Mac to route audio through your computer softphone.

1. Connect the micro-USB end of the included cable to the PC port on the WH62 base. 
2. Connect the USB-A end to an available USB port on your PC or Mac.
3. Press the PC button on the top of the WH62 base to enable computer audio.

Enable call control (Yealink USB Connect)

To use the physical call button on your headset to answer and end calls directly in desktop softphones (such as the SONAR Web Phone), you must install Yealink USB Connect .

Without this software running, call audio will work, but you must manually click the answer or hang up buttons in your browser or app interface.

• Download and install the utility from Yealink USB Connect. 
• Use this tool to keep headset firmware up to date and customize ringtones or auto-answer settings.

Daily Use and Call Controls

Base Buttons – Manage calls and switch between connected devices (desk phone, PC) directly from the base.

Answer or End a Call – Press the multi-function call control button on the outside of the earpiece.

Mute Audio – Raise the microphone boom arm up past 30°, or press the Mute button on the headset arm. Lower the boom arm to unmute.

Adjust Volume – Use the + and – volume buttons located along the edge of the earpiece.

Busylight – The LED ring on the headset automatically turns red when you are on an active call, signalling that you are unavailable.

Manufacturer Resources

For hardware specifications and warranty documentation, refer to Yealink’s documentation[cite: 1]:

• Yealink WH62 User Guide
• Yealink WH62 Datasheet
• Yealink USB Connect Client Download