ePoly Edge phones are recommended with net2phone Canada communication solutions. 

How do I set up my new Polycom phone?

The Polycom Edge devices include a desk phone, handset, and an ethernet cable. To connect, simply plug the cable into the phone's LAN port and the other end into a wall port. It's that easy!  

How do I transfer a call?

There are two types of call transfers you can perform: blind and attended. 

Blind Transfer (sent directly to the recipient without introduction)

Send transfer a call without an introduction by following the steps below. 

1. While on a call, press the Transfer button. 
2. Press the Blind soft key 
3. Dial an extension or 10-digit number and press the Call soft key.

If you want to cancel the transfer, press the Cancel soft key.

Attended Transfer (introduce a call before sending a transfer)

Send transfer a call with an introduction by following the steps below. 

1. While on a call, press the Transfer button. 
2. Dial an extension, 10-digit number, or a contact, and press the Call soft key.  
3. Introduce the call, if the transfer is accepted, press the Transfer soft key again to complete the transfer. 

To cancel the call, 

1. If you haven't entered the destination extension, press the Cancel soft key once.
2. If you have entered the destination extension or phone number, press the Cancel soft key twice; this will return you to the original caller.

How do I enable Do Not Disturb (DND)?

Enabling DND will automatically reject all incoming calls and send them straight to voicemail. 

When DND is enabled, you will see an icon with a phone and a red circle with a minus symbol, as shown below. You can see all your missed calls in your call history or by pressing the down arrow of the navigation pad. 

To enable/disable DND, press the DND soft key.  

How can I listen to a voicemail through my device? 

1. Dial *98. 
2. Enter your voicemail PIN. 
3. Follow the voice prompts to listen to new or saved voicemails. 

How do I find missed calls or see my call history?

To access your call history, use the circular navigation pad. 

Missed calls: press the down arrow key

Received calls: press the left arrow key. 

Placed calls: press the right arrow key.

Alternatively, you can view call history by selecting Directories and then Recent Calls, or learn how to Access, Filter, and Export your Personal Call History in the Sonar portal!  

How can I initiate a conference (three-way) call?

Yes. There are two ways you can initiate a conference call. 

Use the Conference soft key before dialling out a third party. 

1. While on a call, press the Conference soft key. The first party you were speaking to is placed on hold. 
2. Dial an extension or 10-digit number and press the Send soft key. 
3. After the second party has answered, press the Confrnc key again to merge the calls. 

Use the Join soft key, while on a call with another call on hold. 

1. From the active call, press the Join 

During a conference call, you can perform these actions:

• Place the conference call on hold.
• Split the conference call into two calls on hold.
• End the conference call.

How do I change my ringtone? 

The Poly Edge series offers a variety of ringtone styles. 

To change your ringtone for all incoming calls, follow the steps below. 

1. Navigate to Settings > Basic > Preferences.
2. Press Ring Type. 
3. Select a new ringtone from the list.
   If you want to hear the ringtone, press Play.
4. The last ringtone you select will automatically be saved. 

You can exit the Ring Type menu by pressing the Back soft key or the Home key.

To change your ringtone for an individual contact's incoming calls, follow the steps below. 

1. Navigate to Directories > Contact Directory. 
2. Select the contact whose ringtone you want to change. 
3. Press Edit.
4. From the Edit Contact screen, press Ring Type. 
5. Select a new ringtone from the list.
6. Press Save before exiting. 

How can add new contacts to my device?  

You can add contacts directly to your device or through the Sonar portal with Hotkey Customization. Learn how to Add External Contacts to User Phone Directories with Hotkey Builder.   

To view your contact directory, follow the steps below. 

1.  Open the main menu.
2.  Select Directories.
3. Select Contact Directory. 

To add a contact to your device, follow the steps below. 

You can choose the information you want to enter for each contact; however, you must include the contact's number and name.

1. Navigate to Directories, then Contact Directory. 
2. Select Add. 
3. Add in the information for your new contact. 
4. Press Save before exiting.